Norm Type Process Pumps (Norm Tipi Process Pompaları)

Application
  • Used as heavy duty pump for handling all types of hydrocarbons and inorganic products
  • A suitable for handling clean or slightly contaminated, non-aggressive liquids in munipicial and industrial heating, water supply, booster, and recycling plants

Performance Range

  • Capacity  : up to 1250 m³/h
  • Head  : up to 100 m
  • Discharge Flange : Ø 150 - 300 mm
  • Operating Pressure : up to 16 kg/cm²
  • Operating Temperature : up to 140ºC

Construction

Horizontal single stage, single suction centrifugal pumps of the process type designed to DIN 24555 with higher capacity levels.

Hydraulically balanced through back vanes or for larger diameters through balance holes.

Supporting bearings as oil or grease lubricated antifriction bearings and shaft sealing by means of stuffing box or mechanical seals.

Easy maintenance by rear pull-out feature without disconnection of pipework.

Installation

Horizontal with direct coupled motor. Vertical wet pit or dry installation on request.

Standard Materials

Volute Casing : Cast Iron (gray/nodular)
Impeller : Cast Iron / Bronze
Pump Shaft : Cr-steel